基于快速傅里叶变换的扫描单发单收面阵近场成像技术

近年来,扫描单发单收面阵近场成像技术在安检、医疗等民用领域中引起了广泛关注.然而,传统的距离徙动算法在对回波进行处理的过程中无法避免多步近似和插值操作,并且忽视了信号传播衰减带来的不利影响.因此,提出了一种基于快速傅里叶变换的扫描单发单收面阵近场成像技术,该技术通过保留回波模型中的幅度衰减因子,并根据目标回波方程特性对...     

单晶硅反射镜激光能量吸收系数与衬底表面质量的关联

高能激光系统中,单晶硅基底反射镜的能量吸收系数是影响系统性能的关键指标。衬底加工质量对镀膜后元件激光能量吸收系数影响显著。通过测试不同衬底粗糙度、划痕密度的单晶硅反射元件,分析衬底表面典型加工特征(粗糙度、划痕)对激光能量吸收系数的影响规律,认为粗糙度与吸收系数正相关,粗糙度均方根从0.668nm降低至0.345nm会使吸收系数降低28.0%。少量划痕对吸收系数的直接影响并不明显,吸收系数均值变化在3.1%以内。但表面划痕会诱发激光损伤,划痕密度较大时会引起后续能量吸收持续增大,辐照400s后,吸收系数较辐照100s时增大18.3%。     

竖直狭缝内泡沫材料火蔓延的数值模拟研究

用FDS软件对泡沫材料在竖直狭缝内的火蔓延进行模拟计算。计算结果表明竖直火蔓延速度在狭缝宽度为6 cm时最大,而4 cm和8 cm情况下大约相同。对不同时刻壁面火焰的高度数据进行线性拟合,得出狭缝内泡沫层燃烧的火焰高度和单位宽度热释放速率关系为幂次的函数关系,其形式和前人的结论公式基本相同。但是,由于狭缝的作用和点火源的形式不同而存在一个单位宽度热释放速率校正的参数b。同时,由于通风受限,相对于开放空间,狭缝空间内火焰的高度随热释放速率的增加增长较慢。     

高分辨率UAV SAR的三维运动误差分离与补偿

在基于SAR回波的数据处理中,多普勒调频率具有很高的估计精度且对场景的依赖性很小,可以更广泛地用于自聚焦处理。基于多普勒调频率参数估计,针对回波包络及相位分别提出了误差提取模型,并通过包络误差校正和相位误差补偿两个步骤实现了高精度的运动补偿处理。实测数据表明,本文方法可以在低精度导航信息情况下获取高分辨率雷达图像。     

基于满足率的随舰备件配置方案

针对满足率只有统计定义的问题,从不同角度研究了备件满足率的概率性质,给出了满足率的两种概率模型,揭示了满足率的内涵和实际工程意义。在此基础上,给出了系统备件保障满足率的概率定义,建立了以系统备件满足率为约束、备件总重量最小为目标的随舰备件配置优化模型,研究了优化模型的边际效益算法。实例分析表明：该方法为合理制定舰艇随舰备件保障方案提供了决策依据。     

Choosing arrival process models for service systems: Tests of a nonhomogeneous Poisson process

Service systems such as call centers and hospital emergency rooms typically have strongly time‐varying arrival rates. Thus, a nonhomogeneous Poisson process (NHPP) is a natural model for the arrival process in a queueing model for performance analysis. Nevertheless, it is important to perform statistical tests with service system data to confirm that an NHPP is actually appropriate, as emphasized by Brown et al. [8]. They suggested a specific statistical test based on the Kolmogorov–Smirnov (KS) statistic after exploiting the conditional‐uniform (CU) property to transform the NHPP into a sequence of i.i.d. random variables uniformly distributed on [0,1] and then performing a logarithmic transformation of the data. We investigate why it is important to perform the final data transformation and consider what form it should take. We conduct extensive simulation experiments to study the power of these alternative statistical tests. We conclude that the general approach of Brown et al. [8] is excellent, but that an alternative data transformation proposed by Lewis [22], drawing upon Durbin [10], produces a test of an NHPP test with consistently greater power. We also conclude that the KS test after the CU transformation, without any additional data transformation, tends to be best to test against alternative hypotheses that primarily differ from an NHPP only through stochastic and time dependence. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 66–90, 2014     

Some aging properties of parallel and series systems with a random number of components

In this article, we study aging properties of parallel and series systems with a random number of components. We show that the decreasing likelihood ratio property is closed under the formation of random minima. We also show, by counterexamples, that other aging properties are not closed under the formation of random minima or maxima. Some mistakes in the literature are corrected. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 238–243, 2014     

Some comparisons of residual life of coherent systems with exchangeable components

Most of the research, on the study of the reliability properties of technical systems, assume that the components of the system operate independently. However, in real life situation, it is more reasonable to assume that there is dependency among the components of the system. In this article, we give sufficient conditions based on the signature and the joint distribution of component lifetimes to obtain stochastic ordering results for coherent and mixed systems with exchangeable components. Some stochastic orders on dynamic (or conditional) signature of coherent systems are also provided. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 549–556, 2014     

Warranty costs: An age‐dependent failure/repair model

An age‐dependent repair model is proposed. The notion of the “calendar age” of the product and the degree of repair are used to define the virtual age of the product. The virtual failure rate function and the virtual hazard function related to the lifetime of the product are discussed. Under a nonhomogeneous Poisson process scenario the expected warranty costs for repairable products associated with linear pro‐rata, nonrenewing free replacement and renewing free replacement warranties are evaluated. Illustration of the results is given by numerical and graphical examples. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004